PISTON COMPRESSOR LUBRICATING OIL 1L
$0.00
| CHARACTERISTICS | STANDARDS | SAE-40 |
|---|---|---|
| Density at 20ºC g/cm 3 | ISO 3675/ATSM D-1298 | 0,86 |
| Viscosity at 40ºC, cSt | ISO 3104/ASTM D-445 | 46 |
| Flash point, ºC | ISO 2592/ASTM D-92 | 200 |
| Freezing point, ºC | ISO 3016/ASTM D-97 | -18 |
| Disemulsivity | ISO 6614/ASTM D-1401 | 40/40/0 (20 min) |
| Phase-I, Phase-II, Phase-III Foam | ISO 6247/ASTM D-892 | 5/0 – 5/0 – 5/0 |
Description
Oil can of 1 liter.
Special lubricating oil for piston compressors. Synthetic base oil.
These oils are formulated for lubrication of cylinders and mechanisms of rotary and reciprocating compressors, air and inert gases. They are also used in hydraulic circuits requiring ash-free products. It is also used in the lubrication of turbine auxiliary equipment as a bath or circulation system for the lubrication of bearings, gearboxes, pumps and moderately loaded hydraulic systems.
PROPERTIES:
- Protection against oxidation.
- Corrosion protection.
- Very good water separation.
- Minimal tendency to form carbonaceous residues.
- High flash point and low volatility.
- Product free of zinc and other metals.
- Oil microfiltered to 3 microns.
SPECIFICATIONS:
- Contents: 1 Lt
- Compressor lubricants: DIN 51 506 VDL VCL
Additional information
| Weight | 5 kg |
|---|
